The most significant advantage of the fully automatic hydrocarbon cleaning machine is that the cleaning solvent used in this equipment is hydrocarbon solvent, which is a relatively environmentally friendly cleaning solution because its chemical composition is relatively simple and there are not too many complex elements. It is a hydrocarbon, a fractionation product of crude oil, only containing the common C and H elements, but with a different molecular structure.

全自動碳氫清洗機的潔凈力相對于其他清洗機來說，其潔凈力比較顯著，光是清洗我們常見的盲孔工件、異型工件以及具有深孔的電池鋼殼等工件都可以清洗干凈，網友們會問，這些工件的油污也不一定要用你們這臺設備才能清洗干凈吧！我們用普通的清洗機也能洗得干凈啊！普通的清洗機確實能洗這類型的工件，但卻有它的弊端，即普通清洗機一般價格較為便宜，清洗工藝簡單，槽體單一，沒有真空系統，使用的清洗劑復雜多樣。我們暫且把它稱之為常壓清洗，在常壓清洗狀態下，像具有深微盲孔的工件以及精密零件的孔內部是無法清洗干凈的，因為清洗劑中含有大量空氣無法排出，清洗液也就無法流進五金工件的深孔內溶解油污，即使是有，也浸潤的不徹底，會有油污殘留。

The cleanliness of fully automatic hydrocarbon cleaning machines is relatively significant compared to other cleaning machines. Simply cleaning common blind hole workpieces, irregular workpieces, and battery steel shells with deep holes can be cleaned clean. Netizens may ask, it is not necessary to use your equipment to clean the oil stains on these workpieces! We can clean it even with a regular cleaning machine! Ordinary cleaning machines can indeed clean this type of workpiece, but they have their drawbacks: they are generally cheaper, have simple cleaning processes, have a single tank, do not have a vacuum system, and use complex and diverse cleaning agents. We will temporarily refer to it as atmospheric cleaning. Under atmospheric cleaning conditions, workpieces with deep and micro blind holes and the interior of precision parts cannot be cleaned thoroughly because the cleaning agent contains a large amount of air that cannot be discharged, and the cleaning solution cannot flow into the deep holes of hardware workpieces to dissolve oil stains. Even if there is, it is not thoroughly soaked and there will be residual oil stains.

另外，由于普通清洗的清洗方式較為單一，就連干燥系統也相對簡單，無非是用高溫烘干，并且也是在常壓狀態下烘干的，這也會讓工件的孔內壁烘干不徹底，就算從外表看不出工件有什么異樣，其實銹蝕已經在悄悄開始，工件孔縫內部會開始慢慢生銹，久而久之，就會銹蝕整個工件，從而降低產品的合格率。使用全自動碳氫清洗機就能避免以上兩種情況的發生，因為我們的清洗機的清洗工藝較為多元化，集多個清洗槽于一體，結合真空清洗、真空干燥技術，使得工件在清洗的過程中可以360度無死角的被碳氫清洗液浸透，在真空干燥環節，我們的真空系統也會把工件孔隙內的空氣抽出來，從而實現從內而外的清洗、烘干效果！

In addition, due to the relatively simple cleaning method of ordinary cleaning, even the drying system is relatively simple. It is only dried at high temperature and also under normal pressure, which can cause the inner wall of the workpiece to not be completely dried. Even if there is no abnormality on the surface, the rust is actually quietly starting, and the interior of the workpiece hole seam will gradually rust, and over time, the entire workpiece will rust, Thus reducing the qualification rate of the product. The use of a fully automatic hydrocarbon cleaning machine can avoid the occurrence of the above two situations, because our cleaning process is more diverse, integrating multiple cleaning tanks, combined with vacuum cleaning and vacuum drying technology, so that the workpiece can be immersed in hydrocarbon cleaning solution 360 degrees without dead corners during the cleaning process. During the vacuum drying process, our vacuum system also extracts air from the pores of the workpiece, Thus achieving cleaning and drying effects from the inside out!

本文由碳氫清洗機友情奉獻.更多有關的知識請點擊: http://m.nianyankeji.cn 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待

This article is a friendly contribution from the hydrocarbon cleaning machine. For more relevant knowledge, please click on: http://m.nianyankeji.cn Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned