通過式清洗機適用于生產批量大，清洗工作量大的機械制造行業，也廣泛適用于交通運輸，石水化工，輕工制品，設備維修等行業的中小零件的清洗。下面小編為您講解通過式清洗機由七大部分組成的詳細的內容。

Through type cleaning machine is applicable to the machinery manufacturing industry with large production volume and cleaning workload, as well as the cleaning of small and medium-sized parts in transportation, petrochemical, light industrial products, equipment maintenance and other industries. The following sections will explain the detailed contents of the through type cleaning machine, which consists of seven major parts.

1.機體：

1. Body:

機架由型鋼焊接組合而成。鋼板制作成的可卸式罩殼，配在機架的各個框架結構上，方便維修時輕便裝卸。水箱體內外兩層由鋼板焊接而成。

The frame is welded and assembled by section steel. The removable cover made of steel plate is equipped on each frame structure of the rack, which is convenient for loading and unloading during maintenance. The inner and outer layers of the water tank are welded by steel plates.

內層與水接觸處采用鋼板制作，外層由硅酸鋁保溫A3板制作，中間放有保溫材料，可以達到保溫節能的作用。進出料口兩端都設有兩層聚氨酯擋簾，可以防止清洗液噴出清洗室外。水箱底設計成一定的斜面，便于排除水箱內的積水贓物。另外水箱上還設有進水口、排水口、溢流口、排污門等裝臵。

The inner layer is made of steel plate at the contact with water, and the outer layer is made of aluminum silicate insulation A3 plate, with insulation materials placed in the middle, which can achieve the effect of thermal insulation and energy conservation. Two layers of polyurethane curtain are set at both ends of the inlet and outlet to prevent the washing liquid from spraying out of the washing room. The bottom of the water tank is designed as a certain slope to facilitate the drainage of accumulated water and dirt in the water tank. In addition, the water tank is also equipped with water inlet, water outlet, overflow port, sewage gate and other devices.

2.加熱與溫控系統：

2. Heating and temperature control system:

加熱系統采用水用電加熱管對清洗液進行加熱，數顯式溫控儀對清洗液溫度進行自動控制。清洗液溫度可以從室溫至60℃連續可調（用戶可視實際情況自行設定），當清洗液溫度加熱到設定值時，自動控制系統將關閉加熱器；

The heating system uses an electric water heating pipe to heat the cleaning solution, and the digital temperature controller automatically controls the temperature of the cleaning solution. The temperature of the cleaning solution can be continuously adjusted from room temperature to 60 ℃ (the user can set it according to the actual situation). When the temperature of the cleaning solution is heated to the set value, the automatic control system will turn off the heater;

當清洗液溫度低于設定值時，加熱管將自動加熱。配有的液位發令器，可以使水箱保證有足夠的水位，使加熱器始終埋在水里，起到保護加熱器的作用，降至預定高度以下時，它便發出報警信號，提醒工作人員及時加水。

When the temperature of the cleaning solution is lower than the set value, the heating pipe will automatically heat. The equipped liquid level transmitter can ensure that the water tank has enough water level, so that the heater is always buried in the water, playing the role of protecting the heater. When it drops below the predetermined height, it will send an alarm signal to remind the staff to add water in time.

3.過濾系統：

3. Filtering system:

在水箱中設有兩張插板式濾網，由40目不銹鋼濾網制作，設在水泵吸口前，避免水泵吸入塊狀物和較大體積雜物。

The water tank is equipped with two plug-in filter screens, which are made of 40 mesh stainless steel filter screens, and are installed in front of the water pump suction port to avoid the pump from absorbing lumps and large volumes of debris.

4.噴淋系統：

4. Spray system:

噴淋系統由六排環形噴淋管、噴嘴、水泵以及管道等組成。每組噴淋管由四個方向的（上下左右）噴管構成，噴淋管上設有數個球形噴嘴，可以調節噴射角度，從而保證清洗液多方位噴向預清洗工件，達到方位的清洗機目的。噴淋管路采用鍍鋅鋼管，噴嘴為銅質。

The spray system consists of six rows of annular spray pipes, nozzles, water pumps and pipes. Each group of spray pipes is composed of spray pipes in four directions (up, down, left, right). A number of spherical nozzles are set on the spray pipes, which can adjust the spray angle, so as to ensure that the cleaning solution is sprayed to the pre cleaned workpiece in multiple directions, so as to achieve the purpose of the directional cleaning machine. The spraying pipeline is made of galvanized steel pipe, and the nozzle is made of copper.

5.輸送糸統:

5. Transmission system:

輸送系統田輸送市、輸送鏈、傳動鏈、減速機及工件支撐架等組成。輸送系統的動力由電動機輸出經減速機降低轉速傳至鏈輪輸送裝置。鏈輪輸送帶每節設有工件支撐架,以供方便放置預清洗工件。鏈輪輸送帶以0.9m/min的速度將工件帶入進行清洗等各工段。

The conveying system is composed of conveying system, conveying chain, transmission chain, reducer, workpiece support frame, etc. The power of the conveying system is output by the motor and transmitted to the sprocket conveyor through the reducer to reduce the speed. Each section of the sprocket conveyor belt is equipped with a workpiece support frame to facilitate the supplier to place the pre cleaned workpiece. The sprocket conveyor belt brings the workpiece into each section for cleaning at a speed of 0.9m/min.

6.吹干系統:

6. Drying system:

在距離出料口800mm處設有壓縮空氣吹干裝置,用戶自行接入壓縮空氣,吹干裝置將多方位對清洗完畢后的工件進行吹干。

A compressed air drying device is set 800mm away from the discharge outlet. The user can access the compressed air by himself. The drying device will blow dry the cleaned workpieces in multiple directions.

7.電氣控制系統:

7. Electrical control system:

由電控箱、低壓電器元件、按鈕、數顯表等組成。電控箱單獨設在設備進料端,內裝有國產開關、按鈕、接觸器、繼電器等各種操縱、控制、顯示元件,方便工作人員進行操作。在設備兩端設有急停按鈕,方便工作人員處理突發情況。

It is composed of electric control box, low-voltage electrical components, buttons, digital display meter, etc. The electric control box is separately set at the feeding end of the equipment, and is equipped with domestic switches, buttons, contactors, relays and other operating, control and display elements to facilitate the operation of the staff. Emergency stop buttons are set at both ends of the equipment to facilitate staff to handle emergencies.

通過式清洗機所采用的通過式清洗技術采用頻率28KHz的超聲波進行清洗，由噴淋系統、噴嘴旋轉裝置、磷化系統、自動溫控加熱系統、風切吹水系統等組成。以上就是問題的講解了，更多注意事項來我們網站m.nianyankeji.cn咨詢吧！

The pass through cleaning technology adopted by the pass through cleaning machine adopts the ultrasonic wave with a frequency of 28KHz for cleaning, which is composed of a spraying system, a nozzle rotating device, a phosphating system, an automatic temperature control heating system, a wind cutting and water blowing system, etc. The above is the explanation of the problem. Please visit our website m.nianyankeji.cn for more precautions!