歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

線路板超聲波清洗機的清洗優勢

作者：admin來源：http://m.nianyankeji.cn/時間：2021-11-12

優勢一——清洗速度快。線路板超聲波清洗機的速率比其他清洗方式都高，比浸泡式清洗快10～20倍，比噴淋式清洗提高20％一50％的功效。

Advantage 1 - fast cleaning speed. The speed of circuit board ultrasonic cleaning machine is higher than other cleaning methods, 10 ~ 20 times faster than immersion cleaning, and 20% - 50% more effective than spray cleaning.

優勢二——全方位清洗無死角。與噴淋和與浸泡相比，它沒有清洗死角，因此更適用于內外結構復雜，微觀不平，有狹縫、小孔、拐角、線路密集的電子線路板。

Advantage 2 - all-round cleaning without dead angle. Compared with spraying and soaking, it does not clean dead corners, so it is more suitable for electronic circuit boards with complex internal and external structures, micro unevenness, slits, small holes, corners and dense lines.

優勢三——線路板不會被損壞變形。與噴淋相比，的線路板超聲波清洗機清洗薄的和微小線路板時，也會保證線路板的完好。

Advantage 3 - the circuit board will not be damaged or deformed. Compared with spraying, the professional circuit board ultrasonic cleaning machine will also ensure the integrity of the circuit board when cleaning thin and micro circuit boards.
噴淋清洗機

優勢四——適應清洗多種污漬。可以用于除油、去污、除銹、除氧化皮、鈍化等多種頑固污漬。

Advantage 4 - suitable for cleaning a variety of stains. It can be used for oil removal, decontamination, rust removal, deoxidization, passivation and other stubborn stains.

優勢五——適用材質廣。的線路板超聲波清洗機適用于鋼、鑄鐵、不銹鋼、銅、鋁、玻璃、電路板、電子和光學元件等各種零件的清洗工作。

Advantage 5 - wide application of materials. The professional circuit board ultrasonic cleaning machine is suitable for cleaning various parts such as steel, cast iron, stainless steel, copper, aluminum, glass, circuit board, electronic and optical components.

優勢六——清洗一致性好。不管需要清洗的線路板是寬是窄，是大事小，結構復雜還是簡單，單件還是批量，放入線路板超聲波清洗機中清洗后，都可以獲得手工清洗無可比擬的均一的清潔度。

Advantage 6 - good cleaning consistency. No matter whether the circuit board to be cleaned is wide or narrow, large or small, complex or simple structure, single piece or batch, after being cleaned in the circuit board ultrasonic cleaning machine, you can obtain the unparalleled uniform cleanliness of manual cleaning.

基于線路板超聲波清洗機的這些優勢，在它上市后，便受到了工程人員和試驗人員的喜愛。只是在使用線路板超聲波清洗機時，要想讓它的優勢大程度的顯現出來，還需要調節好清洗溶液的溫度，在40度～50度間的液體溫度，是適合進行清洗工作的。

Based on these advantages of circuit board ultrasonic cleaning machine, it has been loved by engineers and testers since it came into the market. Only when using the circuit board ultrasonic cleaning machine, in order to maximize its advantages, it is also necessary to adjust the temperature of the cleaning solution. The liquid temperature between 40 ° C and 50 ° C is the most suitable for cleaning.

以上就是今天給大家講解的詳細內容，更多的精彩內容請點擊我們的網站噴淋清洗機http://m.nianyankeji.cn，我們會有更多的精彩內容等您查看.

The above is the detailed content explained to you today. For more wonderful content, please click our website spray cleaning machine http://m.nianyankeji.cn , we will have more wonderful content for you to see

上一篇：工業超聲波清洗機為什么不能當洗衣機用？
下一篇：水基超聲波清洗工藝